Lincoln Nautilus: Tire Sealant and Inflator Kit / What Is the Tire Sealant and Inflator Kit. Tire Sealant and Inflator Kit Precautions
What Is the Tire Sealant and Inflator Kit
Tire Inflator and Sealant Kit
The kit consists of an air compressor to re-inflate the tire and a canister of sealing compound that will effectively seal most punctures. This kit will provide a temporary tire repair allowing you to drive your vehicle up to 120 mi (200 km) at a maximum speed of 50 mph (80 km/h) to reach a tire service location.
Note: The temporary mobility kit contains enough sealant compound in the canister for one tire repair only. See an authorized dealer for replacement sealant canisters.
Tire Sealant and Inflator Kit Precautions
WARNING: Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death.
WARNING: Do not run the engine when operating the air compressor unless the vehicle is outdoors or in a well-ventilated area.
Note: Do not use the kit if a tire has become severely damaged. Only punctures located within the tire tread can be sealed with the kit.
Do not attempt to repair punctures larger than 0.24 in (6 mm) or damage to the tire's sidewall. The tire may not completely seal.
- Drive carefully and avoid abrupt steering maneuvers.
- Periodically monitor tire inflation pressure in the affected tire; if the tire is losing pressure, have the vehicle towed.
- Read the information in the Tips for Use of the Kit section to make sure safe operation of the kit and your vehicle.
Locating the Tire Sealant and Inflator Kit. Tire Sealant and Inflator Kit Components
Locating the Tire Sealant and Inflator Kit
The kit is located under the load floor in the
rear of the vehicle.
Tire Sealant and Inflator Kit Components
Air compressor (inside)
Selector switch
On and Off button
Air pressure gauge
Sealant bottle and canister
Dual purpose hose: air and repair
Tire valve connector
Accessory power plug
Casing/housing
Bike/raft/sports ball adapters
..
Other information:
Lincoln Nautilus 2018-2024 Service Manual: Transport Mode Deactivation. General Procedures
Deactivation NOTE: After vehicle build, some vehicle modules are set in Transport mode including the IPC and the BCM . Transport mode reduces battery drain during longer periods where the vehicle is not used. While in transport mode, the IPC displays TRANSPORT MODE CONTACT DEALER in the message center. Various systems may be altered or are disabled when in the transport mode. The ve..
Lincoln Nautilus 2018-2024 Service Manual: Perimeter Anti-Theft Alarm - Component Location. Description and Operation
Item Description 1 BCM 2 Hood latch (with integrated hood ajar switch) 3 Intrusion sensor 4 Anti-theft alarm horn ..
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- USB Ports
- Normal Scheduled Maintenance
- Refueling
- New on site
- Most important about car
Traction Control
How Does Traction Control Work
If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces power in order to increase traction.
Switching Traction Control On and Off
WARNING: The stability and traction control light illuminates steadily if the system detects a failure. Make sure you did not manually disable the traction control system using the information display controls or the switch. If the stability control and traction control light is still illuminating steadily, have the system serviced by an authorized dealer immediately. Operating your vehicle with the traction co
