Lincoln Nautilus: Wipers and Washers / Replacing the Front Wiper Blades. Replacing the Rear Wiper Blades
Replacing the Front Wiper Blades
- Lift the wiper arm and then press the
wiper blade locking buttons together.
Note: Do not hold the wiper blade to lift the wiper arm.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached.
- Slightly rotate the wiper blade.
- Remove the wiper blade.
- To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
Reverse Wipe. Checking the Wiper Blades
Reverse Wipe
What Is Reverse Wipe
Reverse wipe turns on the rear window wiper
when you shift into reverse (R) and the
windshield wipers are on.
Reverse Wipe Settings
Using the instrument cluster controls on
the steering wheel, select Settings...
Replacing the Rear Wiper Blades
Lift the wiper arm.Note: Do not hold the wiper blade to lift
the
wiper arm.
Remove the wiper blade.Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached...
Other information:
Lincoln Nautilus 2018-2026 Service Manual: Instrument Panel Cluster (IPC). Removal and Installation
Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation...
Lincoln Nautilus 2018-2026 Service Manual: Specifications
General Specifications Item Specification Plastic front fascia paint maximum thickness 12 mils (300 microns) Plastic rear fascia paint maximum thickness 12 mils (300 microns) General Specifications Item Specification Plug Weld hole 8 m..
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- Massage Seats
- Opening and Closing the Hood
- Auto Hold
- New on site
- Most important about car
Traction Control
How Does Traction Control Work
If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces power in order to increase traction.
Switching Traction Control On and Off
WARNING: The stability and traction control light illuminates steadily if the system detects a failure. Make sure you did not manually disable the traction control system using the information display controls or the switch. If the stability control and traction control light is still illuminating steadily, have the system serviced by an authorized dealer immediately. Operating your vehicle with the traction co
