Lincoln Nautilus Manuals

Lincoln Nautilus: Audio System / Adjusting the Sound Settings

Lincoln Nautilus 2018-2026 Owners Manual / Audio System / Adjusting the Sound Settings

Balance and Fade (If Equipped)

  1. Press Settings on the touchscreen.
  2. Press Sound Settings.
  3. Press Balance / Fade.
  4. Press the arrows to adjust the settings.

Tone Settings

  1. Press Settings on the touchscreen.
  2. Press Sound Settings.
  3. Press Tone Settings.
  4. Press the arrows or slider bar to adjust the settings.

Speed Compensated Volume

  1. Press Settings on the touchscreen.
  2. Press Sound Settings.
  3. Press Speed Compensated Volume.
  4. Press a setting.

Occupancy Mode (If Equipped)

  1. Press Settings on the touchscreen.
  2. Press Sound Settings.
  3. Press Occupancy Mode.
  4. Press a setting.

Sound Mode (If Equipped)

  1. Press Settings on the touchscreen.
  2. Press Sound Settings.
  3. Press Sound Mode.
  4. Press a setting.

 

    Switching Shuffle Mode On and Off. Switching Repeat Mode On and Off. Setting a Memory Preset. Muting the Audio

    Switching Shuffle Mode On and Off Press the button on the touchscreen to switch shuffle mode on or off. Note: Not all sources have shuffle mode. Switching Repeat Mode On and Off Press the button on the touchscreen to switch repeat mode on or off...

    Setting the Clock and Date

    Press Settings on the touchscreen. Press Clock Settings. Set the time. Note: The AM and PM options are not available if 24-hour mode is on. Switching Automatic Time Updates On and Off Press Settings on the touchscreen...

    Other information:

    Lincoln Nautilus 2018-2026 Service Manual: Headlamps. Diagnosis and Testing


    DTC Charts DTC Chart: BCM Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).   DTC Description Action B1499:11 Exterior Lamps Power Supply "A": Circuit Short to Ground  ..

    Lincoln Nautilus 2018-2026 Service Manual: Headlamp Leveling Module. Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation. Using a diagnostic scan tool, begin the PMI process for the Headlamp leveling mo..

    Categories

    Locating the Pre-Collision Assist Sensors

    Lincoln Nautilus. Locating the Pre-Collision Assist Sensors

    Camera. Radar sensor (if equipped).

    If a message regarding a blocked sensor or camera appears in the information display, something is obstructing the radar signals or camera images. The radar sensor is behind the fascia cover in the center of the lower grille. With a blocked sensor or camera, the system may not function, or performance may reduce. See Pre-Collision Assist – Information Messages.

    read more

    Copyright © 2026 www.linautilus.com