Lincoln Nautilus: Vehicle Wi-Fi Hotspot / Changing the Vehicle Wi-Fi Hotspot Name or Password
Tap the vehicle drawer on the top left of the
screen.
- Press Settings.
- Press Vehicle Hotspot.
- Press Settings under the Vehicle Hotspot
menu.
- Press Edit.
- Press Change Network Name.
- Enter your required network name.
- Press the enter key to save the network
name.
- Press Change Password.
- Enter your required password.
- Press the enter key to save the
password.
Changing the Wi-Fi Hotspot Frequency
Note: The Vehicle Hotspot frequency band
is selectable depending upon your device
capabilities. You will be unable to connect
your device to the Vehicle Hotspot if it does
not support the selected frequency band.
Tap the vehicle drawer on the top left of the
screen.
- Press Settings.
- Press Vehicle Hotspot.
- Press Settings under the Vehicle Hotspot
menu.
- Press Edit.
- Select a frequency.
- Press Done.
You can create a Wi-Fi hotspot in your
vehicle and allow devices to connect to it for
access to the Internet.
Tap the vehicle drawer on the top left of the
screen...
Audio System Precautions
WARNING: Driving while distracted
can result in loss of vehicle control, crash
and injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road...
Other information:
DTC Charts
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
RTM
DTC Chart
DTC
Description
Action
U0146:00
Lost Communication with Gateway "A": No Sub Type Information
&nbs..
System Operation
Overview
Multiplexing
is a method of sending 2 or more signals simultaneously over a single
circuit. Multiplexing allows 2 or more electronic modules (nodes) to
communicate over a twisted wire pair [data (+) and data (-)] network.
The information or messages that can be communicated on these wires
consists of commands, status or data. Multiplexing reduces the weight of
t..