Lincoln Nautilus: Capacities and Specifications / Engine Specifications - 2.0L. Engine Specifications - 2.7L. Motorcraft Parts - 2.0L. Motorcraft Parts - 2.7L
Engine Specifications - 2.0L
Engine Specifications - 2.7L
Motorcraft Parts - 2.0L
1 If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.
We recommend Motorcraft parts that are available at your authorized dealer or at www.fordparts.com. We engineer these parts for your vehicle to meet or exceed our specifications. Use of other parts could impact vehicle performance, emissions and durability. Your warranty could be void for any damage related to use of other parts.
Motorcraft Parts - 2.7L
1 If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.
We recommend Motorcraft parts that are available at your authorized dealer or at www.fordparts.com. We engineer these parts for your vehicle to meet or exceed our specifications. Use of other parts could impact vehicle performance, emissions and durability. Your warranty could be void for any damage related to use of other parts.
Engine Oil Capacity and Specification - 2.0L
Use oil that meets the defined specification
and viscosity grade.
If you do not use oil that meets the defined
specification and viscosity grade, it could
result in:
Component damage that your vehicle
warranty does not cover...
Other information:
Lincoln Nautilus 2018-2025 Owners Manual: Tire Pressure Monitoring System – Troubleshooting
Tire Pressure Monitoring System – Warning Lamps The low tire pressure warning lamp has combined functions, as it warns you when your tires need air, and when the system is no longer capable of functioning as intended. Tire Pressure Monitoring System – Information Messages ..
Lincoln Nautilus 2018-2025 Service Manual: Brake Disc Machining. General Procedures
Repair NOTE: Do not machine the brake discs for any brake noise concern (squeal, squeak, moan, groan, grunt, grind, etc.). Brake disc machining is allowed if one of the below conditions is present; Excessive corrosion/rust and/or pitting on the braking surface. Excessive bluing discoloration and/or heat spots on the braking surface. Scoring of the brake disc surface. NOT..
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- Locating the Pre-Collision Assist Sensors
- Drive Mode Control
- Auto Hold
- New on site
- Most important about car
Programming the Garage Door Opener to Your Garage Door Opener Motor
