Depending on your vehicle option package,
the controls may look different from what
you see here.
Other information:
Removal
NOTE:
This step is only necessary if the IPMB is being replaced.
NOTE:
This procedure can be used for all locations of the component.
Using a diagnostic scan tool, begin the PMI process for the IPMB following the on-screen instructions.
Position the front driver seat to access the IPMB .
Remove the retainers and the IPMB cove..
Removal
NOTE:
LH side shown, RH side similar.
NOTE:
Removal steps in this procedure may contain installation details.
NOTICE:
To avoid damage to moulding, only use moderate force.
Using a non-marring trim removal tool, disengage the retainer clips.
Remove the moulding.
Installation
To install, reverse the re..