Lincoln Nautilus: Electrical Distribution / Module Configuration - Vehicles With: Over-the-Air (OTA) Programming
Check
NOTE:
Perform the following pre-checks to make sure module programming completes without errors.
Start the programming session in Key OFF, Engine OFF and prior to initiating programming, turn to KOEO ...
System Operation
Overview
Over the Air (OTA) Programming
Over-the-Air updates allow for vehicle system software to be updated
wirelessly over Wi-Fi (both private and or public Wi-Fi connection) and
or the vehicle cellular network...
Other information:
Special Tool(s) /
General Equipment
205-153
(T80T-4000-W)
Handle
205-990Installer, Axle SealTKIT-2012A-FLTKIT-2012A-ROW
Flat Headed Screw Driver
Removal
NOTE:
Drain the RDU fluid to the bottom of halfshaft seal.
Drain the RDU ...
Removal
NOTE:
This step is only necessary if the TRM is being replaced.
Using a diagnostic scan tool, begin the PMI process for the TRM following the on-screen instructions.
Remove the LH loadspace trim panel.
Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation)
...
Categories
What Is Auto-Start-Stop
The system is designed to help reduce fuel
consumption and CO2 emissions by stopping
the engine when it is idling, for example at
traffic lights.
Auto-Start-Stop Precautions
WARNING: Apply the parking brake,
shift into park (P), switch the ignition off
and remove the key before you leave your
vehicle. Failure to follow this instruction
could result in personal injury or death.
WARNING: Apply the parking brake,
shift into park (P), switch the ignition off
and remove the key before you open the
hood or have any service or repair work
completed. If you do not switch the ignition
off, the engine could restart at any time.
Failure to follow this instruction could result
in personal injury or d
read more