Lincoln Nautilus: Security / Passive Anti-Theft System. Anti-Theft Alarm System
Passive Anti-Theft System
What Is the Passive Anti-Theft System
The passive anti-theft system prevents someone from starting the vehicle with an incorrectly coded key.
How Does the Passive Anti-Theft System Work
The passive anti-theft system arms when you switch the ignition off.
It disarms when the ignition is switched on with a correctly coded key.
Note: The system is not compatible with non-Ford aftermarket remote start systems.
Note: Do not leave a duplicate coded key in your vehicle. Always take the keys and lock all doors when leaving your vehicle.
Anti-Theft Alarm System
What Is the Anti-Theft Alarm System
The Anti-Theft Alarm System warns you of an unauthorized entry to your vehicle.
How Does the Anti-Theft Alarm System Work
When armed, the anti-theft alarm is triggered in any of the following ways:
- If someone opens a door, the liftgate or the hood without a correctly coded key or remote control.
- If you turn the power on without a correctly coded key.
- If the interior sensors detect movement inside your vehicle.
- If the inclination sensors detect an attempt to raise your vehicle.
- If someone disconnects the vehicle battery or the battery backup alarm.
If the anti-theft alarm is triggered, the alarm horn sounds for 30 seconds and the direction indicators flash for 5 minutes.
Any further attempts to carry out one of the above sounds the alarm again.
What Is the Perimeter Alarm
The perimeter alarm is designed to detect unauthorized access to your vehicle.
What Are the Interior Sensors
The interior sensors are designed to detect any movement inside your vehicle.
The interior sensors are in the overhead console.
Note: Do not cover the interior sensors.
What Are the Inclination Sensors (If Equipped)
The inclination sensor is designed to detect an attempt to raise your vehicle, for example to remove a wheel or to tow it away.
Security
..
Anti-Theft Alarm System Settings. Security – Troubleshooting
Anti-Theft Alarm System Settings
What are the Alarm Security Levels
You can select two levels of alarm security,
all sensors and perimeter sensing.
All Sensors
All sensors is the standard setting...
Other information:
Lincoln Nautilus 2018-2026 Owners Manual: Phone
Phone Precautions WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle...
Lincoln Nautilus 2018-2026 Owners Manual: Switching the Lane Keeping System On and Off. Switching the Lane Keeping System Mode
Switching the Lane Keeping System On and Off To activate the lane keeping system, press the button on the turn signal lever. Note: The system stores the on or off setting until manually changed, unless it detects a MyKey™. If the system detects a MyKey™, it defaults to on and the mode is set to alert...
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- USB Ports
- Locating the Pre-Collision Assist Sensors
- Interior Lamp Function. Adjusting the Instrument Panel Lighting Brightness. Ambient Lighting. Interior Lighting – Troubleshooting
- New on site
- Most important about car
Changing a Flat Tire
WARNING: If the tire pressure monitor sensor becomes damaged it may not function.
Note: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies. If you must use a sealant, use the Tire Mobility Kit sealant. Replace the tire pressure monitoring system sensor and valve stem on the wheel by an authorized dealer after use of the sealant.
Note: The tire pressure monitoring system indicator light will illuminate when the spare tire is in use. To restore the full function of the monitoring system, all road wheels equipped with tire pressure monitoring sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply the brake hea
