Lincoln Nautilus: Seatbelt Systems / Seatbelt Tongue Rotated On Belt. General Procedures
Adjustment
NOTE:
Typical seatbelt tongue shown, others similar.
-
Fold the seatbelt as indicated.
-
-
Feed the folded portion of the seatbelt into the seatbelt tongue.
-
Pull the seatbelt through the seatbelt tongue to remove the twist in the seatbelt.
Inspection
WARNING:
All seatbelt components must be inspected and corrected as
part of any collision repair. Inspect all seatbelt components as
prescribed by Seatbelt Procedure After a Collision found in Section
501-20A General Procedures of this manual...
Adjustment
NOTE:
Typical D-ring shown, others similar.
If required, remove the necessary trim panel(s).
Fold the seatbelt as indicated...
Other information:
Inspecting the Tire for Wear
When the tread is worn down to one
sixteenth of an inch (2 mm), tires must
be replaced to help prevent your vehicle
from skidding and hydroplaning. Built-in
treadwear indicators, or wear bars,
which look like narrow strips of smooth
rubber across the tread will appear on
the tire when the tread is worn down to
one sixteenth of an inch (2 mm)...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the nuts, disconnect the electrical connector and remove the LH insulator panel.
NOTICE:
Do not service the brake pedal or brake booster
without first removing the stoplamp switch...