Other information:
Removal
NOTE:
If installing a new PAM
, it is necessary to upload the module configuration information to the
scan tool prior to removing the module. This information must be
downloaded into the new PAM after installation.
Using a diagnostic scan tool, begin the PMI process for the PAM following the onscreen instructions.
Remove the driver knee airbag.
Refer to: ..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
The cowl panel is removed for clarity.
Disconnect the battery.
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
Remove the bolt and the battery hold-down bracket. Remove the battery.
Torque:
93 lb.in (10.5 Nm)
..