Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the IPMA cover.
Release the tabs and clips from the IPMA cover.
Disconnect the wiring harness electrical connector and remove the IPMA cover.
Disconnect the electrical connector and position the wiring harness aside.
..
Removal
Remove the liftgate interior trim panel.
Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Disconnect the reversing lamp electrical connectors.
Remove the reversing lamp assembly.
Remove the reverse lamp nuts.
Push the wiring harness through the liftgate and remove the ..