Lincoln Nautilus: Instrument Cluster Display / Customizing the Instrument Cluster Display
You can customize the gauge displays
through the following:

Changing the Instrument Cluster Display Language
Note: Available languages vary by region.
Changing the Measure Unit
Changing the Temperature Unit
..
Other information:
Removal
Remove the front bumper cover.
Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
Detach and remove the ambient air temperature sensor. Disconnect the electrical connector.
Installation
To install, reverse the removal procedure.
If replacing the ambient air temperature sensor a reset must be performed.
Ref..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current SCCM installed. If the
current SCCM does not respond to the diagnostic scan tool, the tool may
prompt for As-Built Data as part of the repair.
Using a diagnostic scan tool, begin..
Categories
What Is Auto-Start-Stop
The system is designed to help reduce fuel
consumption and CO2 emissions by stopping
the engine when it is idling, for example at
traffic lights.
Auto-Start-Stop Precautions
WARNING: Apply the parking brake,
shift into park (P), switch the ignition off
and remove the key before you leave your
vehicle. Failure to follow this instruction
could result in personal injury or death.
WARNING: Apply the parking brake,
shift into park (P), switch the ignition off
and remove the key before you open the
hood or have any service or repair work
completed. If you do not switch the ignition
off, the engine could restart at any time.
Failure to follow this instruction could result
in personal injury or d
read more