Lincoln Nautilus: Fuel and Refueling
What Is Auto-Start-Stop
The system is designed to help reduce fuel
consumption and CO2 emissions by stopping
the engine when it is idling, for example at
traffic lights...
WARNING: Do not overfill the fuel
tank. The pressure in an overfilled tank
may cause leakage and lead to fuel spray
and fire.
WARNING: The fuel system may be
under pressure...
Other information:
General Specifications
Auto-Start-Stop System
Item
Specification
Voltage
12 Volts
Cold Cranking Amps (CCA) measured at -18 C (-0.4 F)
800 Cold Cranking Amps (CCA)
Battery amps rating
80 Ah
Battery size
H7
Battery type
Absorbed Glass Mat (AGM)
..
Removal
NOTE:
Steps in the removal procedure may contain installation details.
Remove the brake pads.
Refer to: Brake Pads (206-04 Rear Disc Brake, Removal and Installation).
Remove the bolts and the brake caliper anchor plate. Discard the bolts.
Torque:
76 lb.ft (103 Nm)
Installation
To install, reverse the removal procedure.
..
Categories
WARNING: If the tire pressure
monitor sensor becomes damaged it may
not function.
Note: The use of tire sealant may damage
your tire pressure monitoring system and
should only be used in roadside
emergencies. If you must use a sealant, use
the Tire Mobility Kit sealant. Replace the tire
pressure monitoring system sensor and
valve stem on the wheel by an authorized
dealer after use of the sealant.
Note: The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply
the brake hea
read more