Lincoln Nautilus: Maintenance / Maintenance Precautions
Service your vehicle regularly to help
maintain its roadworthiness and resale value.
There is a large network of authorized
dealers that are there to help you with their
professional servicing expertise. We believe
that their specially trained technicians are
best qualified to service your vehicle properly
and expertly. They are supported by a wide
range of highly specialized tools developed
specifically for servicing your vehicle.
If your vehicle requires professional service,
an authorized dealer can provide the
necessary parts and service. Check your
warranty information to find out which parts
and services are covered.
Use only recommended fuels, lubricants,
fluids and service parts conforming to
specifications. See Capacities and
Specifications.
- Do not work on a hot engine.
- Make sure that nothing gets caught in
moving parts.
- Do not work on a vehicle with the engine
running in an enclosed space, unless you
are sure you have enough ventilation.
- Keep all open flames and other burning
material, such as cigarettes, away from
the battery and all fuel related parts.
- Set the parking brake, shift the
transmission to park (P) and block the
wheels.
Opening the Hood
Inside the vehicle, pull the hood release
handle located under the left-hand side
of the instrument panel.
Slightly lift the hood...
Other information:
Special Tool(s) /
General Equipment
Master Cylinder Bleeding Set
Bleeding
NOTICE:
If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
Master Cylinder
NOTE:
When a new brake master cylinder has been installed, it
should be primed to prevent air from entering the system...
WARNING: Do not adjust the mirrors
when your vehicle is moving. This could
result in the loss of control of your vehicle,
serious personal injury or death.
Left-hand mirror.
Adjustment control.
Right-hand mirror.
To adjust your mirrors, switch your vehicle
on, with the ignition in accessory mode or
the engine running and then:
Select the mirror you want to adjust...