Lincoln Nautilus: Lane Keeping System / Switching the Lane Keeping System On and Off. Switching the Lane Keeping System Mode
Switching the Lane Keeping System On and Off
To activate the lane keeping
system, press the button on the
turn signal lever.
Note: The system stores the on or off setting until manually changed, unless it detects a MyKey™. If the system detects a MyKey™, it defaults to on and the mode is set to alert.
Note: If the system detects a MyKey™, pressing the button does not affect the on or off status of the system. You can only change the mode and intensity settings.
Switching the Lane Keeping System Mode
The lane keeping system has different settings that you can view or adjust using the information display.
The system stores the last known selection for each of these settings. You do not need to readjust your settings each time you switch on the system.
To change the lane keeping system mode, use the instrument cluster display:
- Using the instrument cluster display controls on the steering wheel, select SETTINGS.
- Select Driver assistance.
- Select Lane keeping system.
- Select Mode.
- Select a mode.
Note: The system remembers the last setting when you start your vehicle. If the system detects a MyKey™, it defaults to the last setting for that MyKey™.
What Is the Lane Keeping System. How Does the Lane Keeping System Work. Lane Keeping System Precautions. Lane Keeping System Limitations
What Is the Lane Keeping System
The lane keeping system alerts you by
providing temporary steering assistance or
steering wheel vibration when it detects an
unintended lane departure...
Lane Keeping System Settings. Alert Mode. Aid Mode
Lane Keeping System Settings
To change the steering wheel vibration, use
the instrument cluster display:
Using the instrument cluster display
controls on the steering wheel, select
Driver Assist...
Other information:
Lincoln Nautilus 2018-2023 Service Manual: Tire Pressure Monitoring System (TPMS) Sensor Location Calibration. General Procedures
Special Tool(s) / General Equipment 204-D081A (204-D081) Tire Pressure Monitor (TPMS) Ford Diagnostic Equipment Programming NOTE: The TPMS can be placed into learn mode using a diagnostic scan tool or manually where a diagnostic scan tool is not available...
Lincoln Nautilus 2018-2023 Owners Manual: Engine Specifications - 2.0L. Engine Specifications - 2.7L. Motorcraft Parts - 2.0L. Motorcraft Parts - 2.7L
Engine Specifications - 2.0L Engine Specifications - 2.7L Motorcraft Parts - 2.0L 1 If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36. We recommend Motorcraft parts that are available at your authorized dealer or at www...
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- Locating the Pre-Collision Assist Sensors
- Power Outlet - Vehicles With: 110V Power Outlet
- Anti-Theft Alarm System Settings. Security – Troubleshooting
- New on site
- Most important about car
Traction Control
How Does Traction Control Work
If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces power in order to increase traction.
Switching Traction Control On and Off
WARNING: The stability and traction control light illuminates steadily if the system detects a failure. Make sure you did not manually disable the traction control system using the information display controls or the switch. If the stability control and traction control light is still illuminating steadily, have the system serviced by an authorized dealer immediately. Operating your vehicle with the traction co
