Lincoln Nautilus: 360 Degree Camera / What Is the 360 Degree Camera. How Does the 360 Degree Camera Work. 360 Degree Camera Precautions. 360 Degree Camera Limitations
What Is the 360 Degree Camera
The 360 degree camera system consists of front, side and rear cameras which provide visibility around your vehicle.
How Does the 360 Degree Camera Work
The 360 Degree Camera system:
- Allows you to see what is directly in front of or behind your vehicle.
- Helps you when parallel parking and centering in a parking space.
- Provides a cross traffic view in front of and behind your vehicle.
- Allows you to see a top-down view of the area outside your vehicle, including the blind spots and obstacles near your vehicle.
360 Degree Camera Precautions
WARNING: The 360 degree camera system still requires the driver to use it in conjunction with looking out of the windows, and checking the interior and exterior mirrors for maximum coverage.
WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
WARNING: Use caution when turning camera features on or off when the transmission is not in park (P). Make sure your vehicle is not moving.
WARNING: You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
360 Degree Camera Limitations
Note: Use caution if a door is ajar. The 360 degree camera could be out of position and the image could be incorrect.
Locating the 360 Degree Cameras. 360 Degree Camera Guide Lines
Locating the 360 Degree Cameras
Rear View Camera
The rear view camera is on the liftgate. It
provides a video image of the area behind
your vehicle.
Front View Camera
The front view camera is in the grille...
Other information:
Lincoln Nautilus 2018-2024 Owners Manual: Blind Spot Information System Requirements. Switching Blind Spot Information System On and Off
Blind Spot Information System Requirements Blind spot information system turns on when all the following occur: You start your vehicle. You shift into drive (D). The vehicle speed is greater than 6 mph (10 km/h). Switching Blind Spot Information System On and Off To switch blind spot information system on or off, use the instrument cluster display: Using the instrument cluster display ..
Lincoln Nautilus 2018-2024 Owners Manual: Instrument Cluster Indicators
Indicators notify you of various features that are active on your vehicle. Adaptive Cruise Control Adaptive Steering Airbag Auto Hold Automatic High Beam Auto Start-Stop Blind Spot Information System Cruise Control (If Equipped) Front Fog Lamp Headlamp High Beam Hill Start Assist Parking Lamps Stability and Traction Control Turn Signal..
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- Massage Seats
- Auto Hold
- Fuel Quality
- New on site
- Most important about car
Changing a Flat Tire
WARNING: If the tire pressure monitor sensor becomes damaged it may not function.
Note: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies. If you must use a sealant, use the Tire Mobility Kit sealant. Replace the tire pressure monitoring system sensor and valve stem on the wheel by an authorized dealer after use of the sealant.
Note: The tire pressure monitoring system indicator light will illuminate when the spare tire is in use. To restore the full function of the monitoring system, all road wheels equipped with tire pressure monitoring sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply the brake hea
