Other information:
System Operation
Body Control Module (BCM)
The BCM controls various systems by monitoring inputs from switches,
sensors and network messages from other modules on the HS-CAN1 and from
the GWM . Based on the inputs received, the BCM activates outputs...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current HSWM installed. If the
current HSWM does not respond to the diagnostic scan tool, the tool may
prompt for As-Built Data as part of the repair...