Other information:
Switching the Hazard Flashers On and Off
The hazard flasher button is on
the
instrument panel. Press the button
to switch the hazard flashers on if
your vehicle is creating a safety hazard for
other road users.
When you switch the hazard flashers on, all
front and rear direction indicators flash.
Note: The hazard flashers operate when the
ignition is in any position, or if the key is not
..
Removal
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation.
Using a diagnostic scan tool, begin the PMI process for the GWM following the on-screen instructions.
Remove the subwoofer and amplifier unit..