Lincoln Nautilus Manuals

Lincoln Nautilus: Starting and Stopping the Engine / Push Button Ignition Switch

Lincoln Nautilus. Push Button Ignition Switch

Switching the Ignition Off

When the ignition is on or in accessory mode, press the push button ignition switch once without your foot on the brake pedal.

Switching the Ignition to Accessory Mode

When the ignition is off, press the push button ignition switch once without your foot on the brake pedal.

All electrical circuits and accessories are operational and the warning lamps and indicators illuminate.

Note: Your vehicle has a battery saver feature that shuts your vehicle off when it detects a certain amount of battery drain, or after approximately 30 minutes of inactivity in accessory mode.

Starting the Engine

With the transmission in park (P), press the brake pedal and press the push button ignition switch. An indicator light on the button illuminates when the ignition is on and when the engine starts.

Note: The system may not function if the passive key is close to metal objects or electronic devices, for example keys or a cell phone.

Note: A valid key must be inside your vehicle to switch the ignition on and start the engine.

    Starting and Stopping the Engine – Precautions

    WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage...

    Starting the Engine

    Starting a Gasoline Engine Before starting your vehicle, check the following: Make sure that the headlamps and electrical accessories are off. Make sure that the parking brake is on...

    Other information:

    Lincoln Nautilus 2018-2023 Service Manual: Lead Terminal Repair. General Procedures

    Materials Name Specification Motorcraft® Ultra-Clear Spray Glass CleanerZC-23 ESR-M14P5-A  Repair Bring the vehicle up to at least the specified room temperature or above. Temperature: 60.8 °F ( 16 °C) NOTE: The new terminal covers the original terminal location, but it must be placed so the terminal conductive areas will be placed on a good ..

    Lincoln Nautilus 2018-2023 Service Manual: Module Controlled Functions - System Operation and Component Description. Description and Operation

    System Operation Body Control Module (BCM) The BCM controls various systems by monitoring inputs from switches, sensors and network messages from other modules on the HS-CAN1 and from the GWM . Based on the inputs received, the BCM activates outputs. For example, the BCM monitors the headlamp switch position. Based on this input, the BCM may provide voltage to the exterior lamps. Batter..


    Locating the Pre-Collision Assist Sensors

    Lincoln Nautilus. Locating the Pre-Collision Assist Sensors

    Camera. Radar sensor (if equipped).

    If a message regarding a blocked sensor or camera appears in the information display, something is obstructing the radar signals or camera images. The radar sensor is behind the fascia cover in the center of the lower grille. With a blocked sensor or camera, the system may not function, or performance may reduce. See Pre-Collision Assist – Information Messages.

    read more

    Copyright © 2023