Lincoln Nautilus: Information and Entertainment System - General Information - Vehicles With: SYNC 4 / Subwoofer and Amplifier Unit. Removal and Installation
Removal
NOTE:
Removal steps in this procedure may contain installation details.
All vehicles
-
Remove the RH loadspace trim panel.
Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation)
.
Subwoofer with integral amplifier
-
Remove the bolts and the subwoofer assembly.
-
Disconnect the electrical connector.
Torque:
62 lb.in (7 Nm)
Subwoofer without integral amplifier
-
Remove the bolts and the subwoofer assembly.
-
Disconnect the electrical connector.
Torque:
62 lb.in (7 Nm)
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the information and entertainment display unit.
Remove the ACM ...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the GSM .
Refer to: Gear Shift Module (GSM) (307-05A Automatic Transmission
External Controls - 8-Speed Automatic Transmission – 8F57, Removal and
Installation)...
Other information:
How Does Automatic High Beam Control Work
Automatic high beam control turns the high
beams on if it is dark enough and no other
traffic is present. If it detects an approaching
vehicle’s headlamps or tail lamps, or street
lighting ahead, the system turns the high
beams off...
Activation
NOTE:
Compressor with a spring rubber clutch shown others similar.
Check the A/C clutch air gap at 3 equally spaced places between the clutch plate and the A/C clutch pulley.
Refer to: Specifications (412-00 Climate Control System - General Information)
...