Lincoln Nautilus: Active Park Assist / Switching Active Park Assist On and Off. Entering a Parallel Parking Space
Switching Active Park Assist On and Off
Press the active park assist
button,
then press the active park assist
icon on the touchscreen to bring
up full screen notifications.
Press the soft keys on the touchscreen to
switch between the parallel park in,
perpendicular park in, or parallel park out
parking modes.
Cancelling Active Park Assist
To cancel parking assistance at any time,
shift out of neutral (N).
Pausing Active Park Assist
To pause parking assistance at any time,
release the active park assist button.
If you open the passenger or rear doors,
active park assist pauses.
To resume parking, press and hold the
button again.
Entering a Parallel Parking Space
- Press the active park assist button.
- Select parallel park.
Note: The system detects other vehicles
and
curbs to find a parking space.
- Use the turn signal lever to search for a
parking space on the driver or passenger
side of your vehicle.
Note: The system defaults to searching for
a parking spot on the passenger side of your
vehicle if you do not use the turn signal lever.
- Drive your vehicle approximately 3 ft (1 m)
away from and parallel to the other
parked vehicles when searching for a
parking space.
Note: A tone sounds and a message
appears in the information and
entertainment display when active park
assist finds a parking space.
- Press and hold the brake pedal.
- Release the steering wheel and shift into
reverse (R).
- Use the accelerator and brake to control
your vehicle's speed when parking. You
are responsible for stopping your vehicle.
- Active park assist is a multi-step process
and requires you to shift the transmission
multiple times. Follow the onscreen
instructions until parking is complete.
Note: You can slow down your vehicle at
any time by pressing the brake pedal.
Note: When parallel parking between
objects, the system will park closer to the
object in front of your vehicle to allow easier
access to the luggage compartment.
What Is Active Park Assist
Assists you with parking in and out of parking
spaces.
How Does Active Park Assist Work
Active park assist uses sensors to detect
parking spaces...
Entering a Perpendicular Parking Space
Press the active park assist button.
Select perpendicular parking.Note: Active park assist does not
recognize
parking space lines and centers your vehicle
between objects...
Other information:
Overview
The
windshield wiper/washer system is activated by the wiper/washer switch.
The following functions/features of the windshield wiper/washer system
are:
Mist wipe
Windshield wash (includes camera wash, if equipped)
Courtesy wipe
Windshield wipers (low/high speed)
Intermittent wipers
Speed dependent wipers
Wiper activated exterior lamps
Rain sensi..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Make sure the road wheels are in the straight ahead position, regardless of steering wheel position.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current SECM installed. If the
current SECM does not respond to the diagnostic ..