Lincoln Nautilus: Rear Disc Brake / Brake Disc Shield. Removal and Installation
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Remove the brake disc.
Refer to: Brake Disc (206-04 Rear Disc Brake, Removal and Installation).
-
Remove the bolts and the brake disc shield.
Torque:
106 lb.in (12 Nm)
Installation
-
To install, reverse the removal procedure.
Materials
Name
Specification
Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B, APM-4-C
-
Removal
NOTE:
Removal steps in this procedure may contain installation instructions...
Special Tool(s) /
General Equipment
Brake Caliper Piston Retractor
Materials
Name
Specification
Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake FluidPM-20
WSS-M6C65-A2
Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B, APM-4-C
-
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
Removal
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current RGTM installed. If the
current RGTM does not respond to the diagnostic scan tool, the tool may
prompt for As-Built Data as part of the repair...
Removal
Position the LH front seat rearward.
Disconnect the electrical connector, remove the nuts and the DC/DC converter control module.
Torque:
16 lb.ft (22 Nm)
Installation
To install, reverse the removal procedure...