Other information:
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
Remove the screw and using the non-marring tool, position the side parking aid camera.
Use the General Equipment: Interior Trim Remover
Disconnect the side parking aid camera electrical connector.
Remove the side parking aid camera.
Remove ..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Make sure the road wheels are in the straight ahead position, regardless of steering wheel position.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current SECM installed. If the
current SECM does not respond to the diagnostic ..