Other information:
Removal
Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Remove the keyless entry rear antenna.
Disconnect the keyless entry rear antenna electrical connector.
Remove the retainers and the keyless entry rear antenna.
Installation
To install, ..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary if the HCM is being replaced.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation.
NOTE:
If ..