Lincoln Nautilus: Instrumentation and Warning Systems / Horn
Removal
Remove the IPC .
Refer to: Instrument Panel Cluster (IPC) (413-01 Instrumentation, Message Center and Warning Chimes, Removal and Installation)...
Horn
Item
Description
1
RH Horn
Comments:Located behind front bumper cover.
2
LH Horn
Comments:Located behind front bumper cover...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If the BCM
did not respond to the diagnostic scan tool, As-Built Data may need to
be entered as part of the repair. This step is only necessary if the BCM is being replaced
Using a diagnostic scan tool, begin the PMI process for the BCM following the on-screen instructions...
DTC Chart(s)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
SODL and SODR
DTC Chart
DTC
Description
Action
B11D6:11
Driver Display Alert LED: Circuit Short To Ground
..
Categories
WARNING: If the tire pressure
monitor sensor becomes damaged it may
not function.
Note: The use of tire sealant may damage
your tire pressure monitoring system and
should only be used in roadside
emergencies. If you must use a sealant, use
the Tire Mobility Kit sealant. Replace the tire
pressure monitoring system sensor and
valve stem on the wheel by an authorized
dealer after use of the sealant.
Note: The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply
the brake hea
read more