Other information:
Special Tool(s) /
General Equipment
Wooden Block
DISASSEMBLY
NOTICE:
Failure to follow the instructions below may result in damage to the TPMS .
NOTICE:
The TPMS
sensor is mounted to the valve stem. Removal of the valve stem
requires dismounting the tire from the wheel and removal of the TPMS sensor...
Programming
NOTE:
This procedure works only if the spare key programming is enabled.
NOTE:
Two previously programmed keys are required to perform this
procedure. All the steps must be completed within 30 seconds.
NOTE:
Make sure all the doors are closed prior to beginning this
procedure and they remain closed until the procedure is complete...