Lincoln Nautilus: Perimeter Anti-Theft Alarm / Perimeter Anti-Theft Alarm - Overview. Description and Operation
Overview
The
perimeter alarm system deters unauthorized entry into the vehicle by
sounding the traffic and/or interior anti-theft alarm horn(s) and
flashing all the turn signals and interior courtesy lamps. When an
unauthorized entry occurs, the horn(s) and lamps activate for 30
seconds. After 30 seconds, the horn(s) stop sounding, but the lamps
continue to flash for up to 5 minutes.
The panic alarm operates similar to the perimeter alarm, but only activates using the panic button on the RKE transmitter.
System Operation
System Diagram
Item
Description
1
BCM
2
Turn Signals
3
Horn
4
Door Ajar Switches
5
Hood Ajar Switch
6
Liftgate Ajar Switch
7
Passenger Door Lock Control Switch
8
IPC
9
Courtesy Lamps
10
Passive Key
11
RTM
12
DDM
13
GWM
14
GWM
15
PDM
16
Driver Door Lock Control Switc..
Other information:
Removal
NOTE:
LH side shown, RH side similar.
Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Disconnect the liftgate anti-pinch switch electrical connector.
Remove the retainers.
Remove the liftgate anti-pinch switch.
..
System Operation
Programmable Module Installation (PMI)
PMI is a diagnostic scan tool process which configures settings in a new module. Data used for the PMI
process is automatically downloaded from the original module and
stored when a diagnostic scan tool session is started. If this data
cannot be retrieved from the module being replaced, the diagnostic scan
tool may prompt for Config..