Other information:
Removal
Remove the front parking aid camera.
Refer to: Front Parking Aid Camera (413-13B)
.
Disconnect the hose and remove the front parking aid camera washer jet.
Installation
To install, reverse the removal procedure.
..
Deactivation
NOTE:
During vehicle build, some modules, such as the IPC and BCM module are set in factory mode.
Factory mode reduces the drain on the battery during longer periods
where the vehicle is not used. While in the factory mode, various
systems may be altered or disabled and the IPC
displays FACTORY MODE CONTACT DEALER in the message center. If the
vehicle is in factory mode, t..