Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation.
Using a diagnostic scan tool, begin the PMI process for the DSP following the on..
When your vehicle is ready to come out of
storage, do the following:
We recommend that you change the
engine oil before you use your vehicle
again.
Wash your vehicle to remove any dirt or
grease film build-up on window surfaces.
Check windshield wipers for any
deterioration.
Check under the hood for any foreign
material that may have collected during
storage such as mice or squir..