Other information:
Preliminary Inspection
Verify the customer concern.
Visually inspect the CV joints for obvious signs of mechanical damage.
If an obvious cause for an observed or reported concern is
found, correct the cause (if possible) before proceeding to the next
step
If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current HSWM installed. If the
current HSWM does not respond to the diagnostic scan tool, the tool may
prompt for As-Built Data as part of the repair...