Lincoln Nautilus: Tire Sealant and Inflator Kit
Inspecting the Wheel Valve Stems
Check the valve stems for holes, cracks,
or cuts that could permit air leakage.
Tire Rotation
WARNING: If the tire label shows
different tire pressures for the front
and rear tires and the vehicle has a
tire pressure monitoring system, then
you need to update the settings for
the system sensors...
What Is the Tire Sealant and Inflator Kit
Tire Inflator and Sealant Kit
The kit consists of an air compressor to
re-inflate the tire and a canister of sealing
compound that will effectively seal most
punctures...
Other information:
General Specifications
Auto-Start-Stop System
Item
Specification
Voltage
12 Volts
Cold Cranking Amps (CCA) measured at -18 C (-0.4 F)
800 Cold Cranking Amps (CCA)
Battery amps rating
80 Ah
Battery size
H7
Battery type
Absorbed Glass Mat (AGM)
..
When the engine is cold, check the
concentration and level of the coolant at the
intervals listed in the scheduled maintenance
information. See Scheduled Maintenance.
Note: Make sure that the coolant level is
between the minimum and maximum marks
on the coolant reservoir.
Note: Coolant expands when it is hot. The
level may extend beyond the MAX mark.
If the coolant level is at or below the ..
Categories
WARNING: If the tire pressure
monitor sensor becomes damaged it may
not function.
Note: The use of tire sealant may damage
your tire pressure monitoring system and
should only be used in roadside
emergencies. If you must use a sealant, use
the Tire Mobility Kit sealant. Replace the tire
pressure monitoring system sensor and
valve stem on the wheel by an authorized
dealer after use of the sealant.
Note: The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply
the brake hea
read more