Lincoln Nautilus: Front Seats / Front Seats - Overview. Description and Operation

Overview

Driver Power Seat

The power driver seat is controlled by the DSM . The DSM is located on the driver seat track. The DSM hard stop/soft stops must be set/reset any time a new DSM , driver seat track, horizontal motor or driver seat backrest is installed.

The memory system allows automatic positioning of the driver seat to 1 of 3 programmable positions. For information on programming memory positions or recalling a stored memory position, refer to the Owner's Literature.

The 10-way driver memory seat is equipped with the following motors:

• Front height motor (serviced with seat track assembly)
• Rear height motor (serviced with seat track assembly)
• Horizontal motor (serviced separately from the seat track assembly)
• Recliner motor (serviced with seat backrest assembly)
• Lumbar motor (serviced with power lumbar assembly)

The 16-way driver memory seat is equipped with the following motors:

• Seat headrest motor (up/down) (serviced with seat headrest assembly)
• Seat head restraint forward/rearward motor (serviced with seat headrest assembly)
• Seat cushion extension motor (serviced with seat track assembly)
• Front height motor (serviced with seat track assembly)
• Rear height motor (serviced with seat track assembly)
• Horizontal motor (serviced separately from the seat track assembly)
• Recliner motor (serviced with seat backrest assembly)

Passenger Power Seat

The 10-way passenger power seat is equipped with the following motors:

• Front height motor (serviced with seat track assembly)
• Rear height motor (serviced with seat track assembly)
• Horizontal motor (serviced separately from the seat track assembly)
• Recliner motor (serviced with seat backrest assembly)
• Lumbar motor (serviced with power lumbar assembly)

The 16-way passenger seat is equipped with the following motors:

• Seat headrest motor (up/down) (serviced with seat headrest assembly)
• Seat head restraint forward/rearward motor (serviced with seat headrest assembly)
• Seat cushion extension motor (serviced with seat track assembly)
• Front height motor (serviced with seat track assembly)
• Rear height motor (serviced with seat track assembly)
• Horizontal motor (serviced separately from the seat track assembly)
• Recliner motor (serviced with seat backrest assembly)

Multi-Contour Seat Feature

This system allows on demand independent lumbar adjustment and/or massage of each front seat. PMI is required when a new SCMG or SCMH is installed.

The multi-contour front seat system consists of the following components:

• SCMG , attached to the backrest of the front driver seat
• SCMH , attached to the backrest of the front passenger seat
• Multi-contour seat buttons, located on the touchscreen
• Multi-contour seat control switch (part of the seat control switch)
• Front seat cushion adjuster, attached to each front seat frame (includes 6 inflatable air bladders and hoses)
• Front seat power lumbar assembly, attached to each front seat backrest (includes air pump, 5 inflatable air bladders and hoses)

Heated Seats

This system allows on-demand, independent, electrical heating of each front seat.

The heated seat system consists of the following components:

• Heated seat buttons, located on the touchscreen
• Seat cushion heater mat
• Seat backrest heater mat
• HVAC module

Heated/Ventilated Seats

The driver and passenger heated/ventilated seat control buttons and indicators are located on the touchscreen. This system allows on-demand, independent, electrical heating or ventilation of each front seat.

The heated/ventilated seat system consists of the following components:

• Seat cushion heater mat
• Seat backrest heater mat
• Blower motor, located within each front seat cushion and backrest
• Heated/ventilated seat buttons, located on the touchscreen
• SCME , integral to the DSM
• Cushion and backrest vent bags (part of the cushion and backrest foam)
• Air duct (bellow)
• Cushion and backrest foam
• Cushion and backrest trim covers