Lincoln Nautilus: Multifunction Electronic Modules / Module Controlled Functions - Overview. Description and Operation
Body Control Module (BCM)
The BCM controls the following:
-
Battery load shed function
-
Battery saver function
-
Brake shift interlock
-
Delayed accessory function
-
Dimmable backlighting
-
Exterior lighting
-
Heated rear windows
-
Heated exterior mirrors
-
Horn
-
Ignition state messaging
-
Interior lighting
-
Keyless entry keypad
-
PATS
-
Perimeter alarm
-
Post crash alert function
-
Power door locks
-
Push-button start function
-
RKE system
-
Remote start function (if equipped)
-
TPMS
-
Transport mode function
-
Wipers and washers
System Operation
Body Control Module (BCM)
The BCM controls various systems by monitoring inputs from switches,
sensors and network messages from other modules on the HS-CAN1 and from
the GWM ...
Other information:
DTC Charts
DTC Chart: BCM
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
DTC
Description
Action
B1115:11
High Mounted Stop Lamp Control: Circuit Short to Ground
..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
The ABS module and HCU are released individually. A new ABS module does not come equipped with an HCU .
NOTE:
The PMI process must begin with the current ABS module installed. If
the current ABS module does not respond to the diagnostic scan tool, the
tool may prompt for As-Built Data as part..