Lincoln Nautilus: Body and Paint / Supplemental Restraint System

Rear Seatbelt Retractor and Pretensioner. Removal and Installation

Removal   WARNING: The following procedure prescribes critical repair steps required for correct restraint system operation during a crash. Follow all notes and steps carefully...

Airbag and Seatbelt Pretensioner Supplemental Restraint System (SRS) - Component Location. Description and Operation

Item Description 1 Driver and passenger C-pillar side impact sensors 2 Driver front door side impact sensor 3 Clockspring 4 PAD indicator 5 RCM 6 OCSM (includes OCS sensor and gel-filled bladder) 7 Passenger front door side impact sensor 8 Seat position sensors 9 LH and RH front impact severity sensors ..

Other information:

Lincoln Nautilus 2018-2026 Service Manual: Factory Mode Deactivation. General Procedures

Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center. If the vehicle is in factory mode, t..

Lincoln Nautilus 2018-2026 Service Manual: Steering Wheel and Column Electrical Components - Overview. Description and Operation

Steering Column Switches Overview The steering column switches are located on and around the steering column. They enable the driver to control various vehicle functions while remaining focused on driving. The steering column switches consist of: Left multifunction switch - controls the turn signals, low/high beam and flash-to-pass headlamp functions. The multifunction switch can be ser..