Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the diagnostic scan tool
prior to removing the module. This information must be downloaded into
the new module after installation.
Carry out the PMI procedure for the PDM .
Refer to: Module Programmi..
Programming
NOTE:
Make sure the passive key battery(ies) measure at
least 2.5 volts. A passive key with a depleted battery only starts the
vehicle when in the backup starting location. The RKE functionality
remains inoperative until the key battery is replaced.
NOTE:
In order to gain module security access, the diagnostic scan tool must have an active Internet connection. A hardwire..